F
-
H Series
Basic Operation
Attaching to Skid Steer
The BrushHound Front Brush Shredder can be attached to any skid steer with a front
mount universal style skid steer style mounting plate. It also requires a standard or high
flow 30 GPM, 3000 PSI power unit.
ATTENTION
Make sure all hydraulic hoses are clear of the front mounting plate before connect-
ing the attachment.
1.
Line the mount on the skid steer up
with the universal mount on the
shredder.
2.
Lower the mount on the skid steer and tilt it forward so that it can
“
scoop
”
up under the
mounting plate on the shredder.
3.
Slowly move the skid steer forward until it taps against the shredder.
4.
Raise the front mount up on the skid steer and tilt backwards.
5.
Check the bottom portion of the mount to see if the mounting plate on the skid steer is
flush with the mounting plate on the shredder.
Skid Steer
Mounting
Plate
Shredder
Mounting
Plate
www.rockhound.com 6
6.
Lower the locking mechanisms on
the skid steer until they are in a hor-
izontal position.
7.
Attach hydraulic hoses to corre-
sponding hoses on the skid steer
until they lock in place. Note: It is
easier to attach hoses when ma-
chine is OFF.
