Pg 20
Pg 21
SETTING YOUR PERSONAL
PREFERENCES
To alter the factory settings to your personal preferences follow the
diagram and instructions below.
TO CHANGE THE LANGUAGE SETTING
1. Keep key pressed down until the display reads “Language”.
2. Press key or key until the display reads your desired
language.
3. Press key to confirm which will also move the controller to the
next setting.
TO CHANGE WATER SUPPLY PREFERENCE
1. Keep key pressed down until the display reads “Language”
then press key until the display reads water supply options.
2. Press key or key to select your preference “water reservoir
operation” or “hard plumbing operation”.
3. Press key to confirm which will also move the controller to the
next setting.
TO CHANGE TEMPERATURE UNIT PREFERENCE
1. Press key until the display reads temperature unit options.
2. Press key or key to select your preference Celsius or
Fahrenheit.
3. Press key to confirm which will also move the controller to the
next setting.
Fig E. The factory setting for the
brew boiler temperature is 103°C
E
TO CHANGE SERVICE BOILER SETTING
1. Press key until the display reads service boiler options.
2. Press key or key to select your preference “service boiler
on” or “service boiler off”.
3. Press key to confirm which will also move the controller to the
next setting.
TO CHANGE THE BREW BOILER TEMPERATURE
(See R 58 / R 60V Boiler temperature conversion table on page 23)
1. Press key until the display reads “brew boiler temperature”.
2. Press key or key until the display reads your desired
temperature (between 95° and 115°C).
3. Press key to confirm which will also move the controller to the
next setting.
TO CHANGE THE SERVICE BOILER PRESSURE
1. Press key until the display reads “service boiler pressure”.
2. Press key or key until the display reads your desired
pressure (between 0.8 and 1.3 Bar).
3. Press key to confirm.
