29
Inner Shaft Assembly
2 0 0 ( A 2 ) & 4 0 0 ( B 1 ) H o u r S e r v i c e
I n n e r S h a f t A s s e m b l y
NOTICE
Inspect each part for scratches.
Do not scratch any sealing surfaces
when servicing your suspension. Scratches can cause leaks.
When replacing seals and o-rings, use your fingers or a pick to remove
the seal or o-ring. Spray isopropyl alcohol on each part and clean with
a clean lint-free shop towel.
Apply
only
SRAM® Butter grease to all Reverb parts, seals, and o-rings.
Remove the inner shaft piston o-ring.
Install a new piston o-ring.
Apply a liberal amount of SRAM Butter grease to the inside of the
new
internal seal head assembly.
Install the internal seal head assembly onto the inner shaft, threaded
end first, and slide it to the middle of the shaft.
1
Pick
2
SRAM Butter Grease
3
