background image

30

CoaguChek

®

 Pro II · Operator’s Manual

A

Touchscreen

 

Shows test results, information, icons,
and results recalled from memory. To
select an option, simply touch the button
lightly.

F

Battery compartment cover 

Remove to insert the battery pack

B

On/Off button

 

Press this button to power the meter on
or off.

G

Charging contacts

 

Used for power supply and/or charging
the battery pack when the meter is
docked in the (optional) Handheld Base
Unit.

C

Test strip guide cover

 

Remove this cover to clean the test strip
guide (if it has become soiled, e.g., with
blood).

H

Code chip slot 

(shown with code chip) 

Insert the code chip here.

D

Test strip guide 

Insert the test strip here.

I

Connection socket for power
adapter 

Plug in the power adapter here.

E

Barcode scanner 

The integrated barcode scanner can
scan operator, patient, and QC sample
IDs into the meter.

J

Infrared interface 

(Covered by the semi‑transparent panel)
Supports data communication.

1 Introduction

 • 1

Summary of Contents for CoaguChek Pro II















































































































































































































Reviews: