Roche CoaguChek Pro II, Operator'S Manual

Page: 150 / 206

150
CoaguChek
®
Pro II · Operator’s Manual
¾
The Patient ID is set to Optional or Required , and
there is no list available:
A
Patient ID can be entered manually via the
onscreen keypad or read in via a barcode scan.
The Patient ID is stored with the test result.
¾
The Patient ID is set to No , but there is a list
available: The list of Patient IDs is always shown
when starting a test. You may now:
– select a patient from the list;
– scan a Patient ID using the barcode scanner;
– create a new patient entry by touching New .
Instead of an ID a consecutive number will be
assigned to this result.
¾
The Patient ID is set to Optional or Required , and
there is a list available: The list of Patient IDs is
always shown when starting a measurement. You
may now:
– select a patient from the list;
– scan a Patient ID using the barcode scanner;
– create a new patient entry by touching New.
You may either read the ID using the barcode
scanner or enter a new ID via the onscreen
keypad.
¾
The Patient ID is set to “hidden” (only possible
with a data management system), and there is a
list available: When you start the test, the screen is
blank and
Scan is displayed.
– You may now scan a Patient ID using the
barcode scanner. If the patient ID is on the
list, the test will proceed. If the patient ID is
not on the list, you will get an error message.
Note that the scanned Patient ID must already be on
the list that is sent from the DMS to the meter. You
cannot use the scanner to scan and enter a new
Patient ID if the Patient ID is set to “hidden”.
7 Extended Functionalities
• 7