Roche CoaguChek Pro II, Operator'S Manual

Page: 27 / 206

27
CoaguChek
®
Pro II · Operator’s Manual
The CoaguChek Pro II system complies with the
emission and immunity requirements described in
EN 61326‑2‑6. It has been designed and tested to
CISPR 11 Class B.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by powering the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
¾
Reorient or relocate the receiving antenna.
¾ Increase the separation between the equipment
and receiver.
¾
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
¾
Consult the dealer or an experienced radio/TV
technician for help.
This Class B digital apparatus complies with Canadian
ICES‑003.
Operating conditions
To ensure that the meter functions properly, please
observe the following guidelines:
¾ Only use the meter at a room temperature
between 12 °C and 32 °C (54 °F and 90 °F). For
information on operating temperatures of test
strips refer to the test strip package inserts. Test
strip operating temperatures may differ from test
parameter to test parameter.
1 Introduction
• 1