Roche CoaguChek Pro II, Operator'S Manual

Page: 112 / 206

112
CoaguChek
®
Pro II · Operator’s Manual
8 Touch or to display the entry of choice.
Select the patient to be tested from the list.
9 If the patient is not in the list, touch New to create
a new entry. You must now enter a Patient ID
using the keypad .
Note : Extended data handling functionality and
patient ID entry options are dependent on the
capabilities of the particular Data Management
System (DMS) being used and may vary. For more
details see 7.1 Data handling (147)
10 Alternatively, the Patient ID can also be entered
using the built‑in barcode scanner .
(7),(8)
Touch
Scan and scan the patient barcode from a
distance of approx. 10‑20 cm (4‑8 inches),
according to the barcode size.
f
The meter beeps once the barcode has been
read successfully.
f
The barcode information appears in the patient
ID field. The scanner turns off after 10 seconds,
if a barcode is not scanned.
(7)
A list of supported barcode symbologies can be found in (186) A.2 Example of barcode symbologies
(8)
A list of supported characters can be found in (189) A.3 Supported characters in 2D barcodes
4 Testing a Blood Sample
• 4