2.
8
9
Take out old batteries if necessary.
Insert the new batteries, making sure that the terminals
are the right way round (shown by the
●
●
+ symbols in the
battery compartment and on the battery).
Replace the battery compartment lid
●
H
and slide it
closed until it locks into place.
Press the ON/OFF button
●
C
to check that the batteries
have been inserted correctly. A function test lasting
2 seconds appears on the display (see Section 2.2).
Accutrend
®
GC switches off automatically after one minute if
none of the buttons have been pressed during this time.
2.2 Switching on the meter for the first time
After you have inserted the batteries, you can switch on the
meter using the ON/OFF switch
●
C
. Immediately after switch-
ing on, the meter always performs an automatic function test
lasting about 2 seconds, checking all instrument functions and
display elements. No entries can be made during this test. The
automatic function test is performed every time the instrument
is switched on using the ON/OFF switch
●
C
with the flap
closed.
When the Accutrend
®
GC is switched on for the first time, you
should check each display element during the function test. To
do this follow the instructions given below.
Accutrend
®
GC
011553 AccuGC GB 19.02.2002 10:40 Uhr Seite 8
