manualshive.com logo in svg

Roche Accutrend GC, User Manual

Share
Download
Roche Accutrend GC User Manual Download Page 11

2.

16

17

Press the SET button briefly. The hours flash on the
display.

Keep pressing 

MEM 

●

B

until the desired hour is

displayed.

Press the 

SET

button briefly. The minutes flash on the

display.

Keep pressing 

MEM 

to set the minutes in the same

way as the hour.

Press the 

SET

button briefly. The day flashes on the

display.

Keep pressing 

MEM 

to set the day in the same way

as the hour.

Press the 

SET

button briefly. The month flashes on the

display.

Keep pressing 

MEM 

to set the month in the same

way as the hour.

Store the changes by closing flap 

●

D

or by pressing

the 

ON/OFF

button 

●

C

. Your settings will be stored

automatically.

Leap year

In a leap year the date will not change automatically from
28.02 to 29.02 but to 01.03. In order to change the date,
proceed as described above.
The date will then change automatically from 29.02 to 01.03.

011553 AccuGC GB  19.02.2002  10:40 Uhr  Seite 16

Summary of Contents for Accutrend GC



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands