manualshive.com logo in svg

Roche Accutrend GC, User Manual

Share
Download
Roche Accutrend GC User Manual Download Page 55

8.

104

105

8.3 Manufacturer’s warranty and guarantee

Manufacturer’s warranty:

Roche Diagnostics guarantees the

proper functioning of your Accutrendd

®

GC to the extent

defined in the completed warranty card supplied with the
instrument, on completion and return of said warranty card.
For precise terms and conditions please see the warranty card.
This does not affect your statutory or other rights.

The warranty covers any material and manufacturing defects
that arise during proper use of the instrument and are discov-
ered and reported within the warranty period. The warranty
does not cover any interference with the instrument or any
case of improper use or maintenance.

We undertake, at our discretion, to repair faulty components
free of charge or provide a fault-free replacement meter.

Statutory and other rights:

The manufacturer’s warranty

given above is in addition to any statutory or other rights
granted through your dealings with the instrument supplier.

8.4 International addresses

Roche Diagnostics GmbH

D

-68298 Mannheim

Germany

Tel.: +49 (6 21) 7 59 46 46

Roche Diagnostics Australia 
Pty Ltd., 31 Victoria Avenue, Castle Hill, NSW 2154

AUSTRALIA
Extracare Enquiry line: 1800 251816

Roche Diagnostics
201 Boul. Armand-Frappier, H7V 4A2, Laval, Québec

CANADA
Tel. 1-800-363-5880 (hotline)

Roche Diagnostics N.Z. 
Ltd, 15 Rakino Way, Box 62-089, Mt. Wellington
Auckland, 

NEW ZEALAND

Tel. 0800-802-299

Roche Diagnostics Ltd
Bell Lane, Lewes
East Sussex, BN7 1LG, 

UNITED KINGDOM

Freephone: 0800 701 000
Freephone Rep. of Ireland: 1800 709 600

011553 AccuGC GB  19.02.2002  10:40 Uhr  Seite 104

Summary of Contents for Accutrend GC



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands