manualshive.com logo in svg

Roche Accutrend GC, User Manual

Share
Download
Roche Accutrend GC User Manual Download Page 12

2.

18

19

2.4 Switching the beeper on and off

The beeper signals provide useful support.
For example, Accutrend

®

GC uses one beep to confirm

successful coding and a series of beeps to indicate the
approaching end of a measurement.
If the beeper is switched on, the bell symbol       appears to the
right of the date. We recommend leaving the beeper switched
on. However, if you find the sound annoying you can switch off
the beeper as follows.

Procedure for switching the beeper on and off

Switch on the meter with the ON/OFF button 

●

C

and

wait until the function test is complete.

Open flap 

●

D

. 

seT

appears on the display 

●

A

.

Press the beeper button 

●

J

briefly using a ballpoint

pen. The bell symbol       disappears.

Close the flap.

Switch off the meter. The setting will be stored automatically.

You can switch the beeper back on again at any time by
following the procedure described above.

011553 AccuGC GB  19.02.2002  10:40 Uhr  Seite 18

Summary of Contents for Accutrend GC



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands