Roca LUMEN AVANT User Manual Download

Page: 58 / 82

Cleaning and maintenance

Cleaning the nozzle while using

the toilet (sitting on the toilet

seat)

Use the following method to clean the nozzle.

●

The nozzle can be cleaned while using the toilet (sitting on the toilet seat). "Nozzle cleaning with the

remote control unit"

●

The nozzle can be moved and cleaned with a sponge or the like for daily maintenance or when removing

hardened contamination.

●

To clean the nozzle while using

the toilet (sitting on the toilet seat)

(Nozzle cleaning with the remote

control unit)

Press the NOZZLE CLEANING

button.

* The nozzle remains retracted inside the body and is

cleaned for approximately 3 seconds.

* This toilet is equipped with an auto cleaning

function which cleans the nozzle and surroundings

automatically before and after the washing or bidet

function.

●

To thoroughly clean the nozzle

when cleaning the toilet

Cleaning the nozzle

Cleaning the nozzle during

maintenance

* Otherwise, the sensor may detect a person and

close the toilet seat or flush the toilet.

Set the AUTO SEAT-OPEN and

AUTO CLEAN buttons to “OFF.”

Lift the seat lid and seat.

* Water comes out from a point near the nozzles

for approximately 3 seconds. The posterior nozzle
extends and moves back and forth in a short
stroke. Water is not sprayed.

Press the NOZZLE CLEANING

button with the toilet seat and seat lid

open.

[Note]

●

Operate the NOZZLE CLEANING button with

the toilet seat lifted up.
* When the toilet seat is closed, “remote control

nozzle cleaning” is performed and the nozzle
does not extend.

NOZZLE CLEANING

AUTO SEAT-OPEN

AUTO CLEAN

NOZZLE CLEANING

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

Summary of Contents for LUMEN AVANT



















































































Search results

Summary of Contents for LUMEN AVANT

Reviews:

Related manuals for LUMEN AVANT

Brands by name

Popular brands

Roca LUMEN AVANT, User Manual

Search results

Summary of Contents for LUMEN AVANT

Reviews:

Related manuals for LUMEN AVANT

Brands by name

Popular brands