Roca LUMEN AVANT User Manual Download

Page: 48 / 82

Useful information for convenience and safety

How to fl ush the toilet in event of power failure

When a power failure occurs, the toilet cannot be flushed using the remote control unit.

Flush the toilet using the following procedure.

Turn (counterclockwise)

How to fl ush the toilet in event of power failure

Remove the top cover.

Disconnect the manual lever (red), pull it up

quickly, and hold it for approximately 5 seconds.

Return the top cover to its original condition.

* Check that the top cover is correctly

installed.

Return the manual lever (red) to its original position

and turn it clockwise approximately 180° to stop
water.
* Check that water supply to the bowl has stopped.

Turn the manual lever (red) counterclockwise

approximately 180° to supply water for at least 10 seconds.
* Water will not run over from the toilet.

Pull up

⬆

Manual lever (red)

Click

Top cover

Manual lever (red)

Top cover

Turn (clockwise)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

E-Bidet.ru -

официальный

дилер

Roca Lumen Avant

РФ

(http://e-bidet.ru)

Summary of Contents for LUMEN AVANT



















































































Search results

Summary of Contents for LUMEN AVANT

Reviews:

Related manuals for LUMEN AVANT

Brands by name

Popular brands

Roca LUMEN AVANT, User Manual

Search results

Summary of Contents for LUMEN AVANT

Reviews:

Related manuals for LUMEN AVANT

Brands by name

Popular brands