Roc Hobby Beechcraft, Operating Manual, Page: 21 / 28

page17
Get your model ready to fly
Check the control throws
The suggested control throw settings for Roc HOBBY are as follows (Dual rate setting):
High Rate Low Rate
Elevator 15mm up/down 10mm up/down
Aileron 18mm up/down 12mm up/down
Rudder 12mm left/right 8mm left/right
Flaps full down: 15mm
Tips : At first flight, fly the model in low rate. The first time you use high rates, be sure to fly
at low to medium speeds. High rates, as listed, are only for EXTREME maneuvering.
1. The motor should rotate counter clockwise
when viewing the plane from the front.
2. Cycle the retract times make sure the
retracts function normally.
1. Keyed the propeller assembly onto the
motor shaft fully. The plate will mate with
the hex nut on the shaft.
2. Hand tighten the spinner, make sure it
is tight enough.
Install the propeller set Check the motor
and retract
1
1
2
2
For More Info Vist: www.motionrc.com