Robustel GoRugged R2000 User Guide
RT_UG_R2000_v.1.0.1 08.10.2015 54 /103
Confidential
Local IP
When the “Mode” is “P2P”.
Define the local IP address of OpenVPN tunnel.
Null
Remote IP
When the “Mode” is “P2P”.
Define the remote IP address of OpenVPN tunnel.
Null
Username
User name used for Authentication Type “Password” or “X509CA
Password”.
Null
Password
Password used for Authentication Type “Password” or “X509CA
Password”.
Null
Encrypt Algorithm
Select from “BF”, “DES”, “DES-EDE3”, “AES128”,
“
AES192” and
“AES256”.
BF: Uses the BF algorithm in CBC mode and 128-bit key.
DES: Uses the DES algorithm in CBC mode and 64-bit key.
DES-EDE3: Uses the 3DES algorithm in CBC mode and 192-bit key.
AES128: Uses the AES algorithm in CBC mode and 128-bit key.
AES192: Uses the AES algorithm in CBC mode and 192-bit key.
AES256: Uses the AES algorithm in CBC mode and 256-bit key.
BF
Keepalive Interval
Set keepalive (ping) interval to check if the tunnel is active.
20
Keepalive Timeout
Trigger OpenVPN restart after n seconds pass without reception of a
ping or other packet from remote.
120
Private Key Password
Password of Private Key for Authentication Type “X509CA”
Null
Enable Compression
Enable to compress the data stream.
ON
Enable NAT
Tick to enable NAT for OpenVPN. The source IP address of host behind
R2000 will be disguised before accessing the remote OpenVPN client.
OFF
Verbose Level
Select the level of the output log. Values range from 0 to 11.
0 -- No output except fatal errors.
1 to 4 -- Normal usage range.
5 -- Output R and W characters to the console for each packet read
and write.
6 to 11 -- Debug info range
0
Advanced Settings
Item
Description
Default
Enable HMAC Firewall
Add an additional layer of HMAC authentication on top of the TLS
control channel to protect against DoS attacks.
OFF
Enable PKCS#12
Enable the PKCS#12 certificate. It is an exchange of digital certificate
encryption standard, used to describe personal identity information.
OFF
