Robustel GoRugged R2000 User Manual Download Page 4

Page: 4 / 104

Robustel GoRugged R2000 User Guide

RT_UG_R2000_v.1.0.1 08.10.2015 3 /103
Confidential



Do not expose the router to extreme conditions such as high humidity / rain, high temperature, direct sunlight,
caustic / harsh chemicals, dust, or water.



Do not try to disassemble or modify the router. There is no user serviceable part inside and the warranty would
be void.



Do not drop, hit or shake the router. Do not use the router under extreme vibrating conditions.



Do not pull the antenna or power supply cable. Attach/detach by holding the connector.



Connect the router only according to the instruction manual. Failure to do it will void the warranty.



In case of problem, please contact authorized distributor.

Summary of Contents for GoRugged R2000









































































































Search results

Summary of Contents for GoRugged R2000

Reviews:

Related manuals for GoRugged R2000

Brands by name

Popular brands

Robustel GoRugged R2000, User Manual

Search results

Summary of Contents for GoRugged R2000

Reviews:

Related manuals for GoRugged R2000

Brands by name

Popular brands