Robustel GoRugged R2000 User Manual Download Page 28

Page: 28 / 104

Robustel GoRugged R2000 User Guide

RT_UG_R2000_v.1.0.1 08.10.2015 27 /103
Confidential

Ping Retry Interval

Set the ping retry interval.

Ping Timeout

Set the ping timeout.

Max Ping Tries

Switch to another link or take emergency action if max continuous ping
tries reached.

Note:

Click“

” for help.

Status

Item

Description

Active Link

Show the current active link.

Uptime

Show how long the current link has been active.

Average Ping Respond Time

Show the average ping respond time of the active link.

3.7

Interface->Ethernet

This section allow user to set the parameter of the Ethernet port. At least one port should be assigned to lan0.

Click

button, configure the port setting.

Summary of Contents for GoRugged R2000









































































































Search results

Summary of Contents for GoRugged R2000

Reviews:

Related manuals for GoRugged R2000

Brands by name

Popular brands

Robustel GoRugged R2000, User Manual

Search results

Summary of Contents for GoRugged R2000

Reviews:

Related manuals for GoRugged R2000

Brands by name

Popular brands