Robustel EG8001 User Guide
RT_UG_EG8001_v.1.0.1 2 June, 2017 50/84
Confidential
Syslog Settings
Item
Description
Default
Enable
Click the toggle button to enable/disable the Syslog settings option.
OFF
Syslog Level
Select from “Debug”, “Info”, “Notice”, “Warning” or “Error”, which from low to
high. The lower level will output more syslog in details.
Notice
Save Position
Select the save position from “RAM”, “NVM” or “Console”. Choose “RAM”. The
data will be cleared after reboot.
Note
: It's not recommended that you save syslog to NVM (Non-Volatile Memory)
for a long time.
RAM
Log to Remote
Click the toggle button to enable/disable this option. Enable to allow gateway
sending syslog to the remote syslog server. You need to enter the IP and Port of
the syslog server.
OFF
Add Identifier
Click the toggle button to enable/disable this option. When enabled, you can add
serial number to syslog message which used for loading Syslog to RobustLink.
OFF
Remote IP Address
Enter the IP address of syslog server when enabling the “Log to Remote” option.
Null
Remote Port
Enter the port of syslog server when enabling the “Log to Remote” option.
514
3.13
Services > Event
This section allows you to set the event parameters. Event feature provides an ability to send alerts by SMS or Email
when certain system events occur.
General Settings @ Event
Item
Description
Default
Signal Quality Threshold
Set the threshold for signal quality. Gateway will generate a log event when
the actual threshold is less than the specified threshold. 0 means disable
this option.
0
