Robustel EG8001 User Guide
RT_UG_EG8001_v.1.0.1 2 June, 2017 16/84
Confidential
2.3
USB Interface
Top View
2.4
Ethernet Ports
Bottom View
Function
Operation
Firmware
upgrade
USB interface is used for batch firmware upgrading, but cannot be used for sending or receiving
data from slave devices which connected to it. You can insert a USB storage device into the router’s
USB interface, such as a U disk or a hard disk. If there have a supported configuration file or a
EG8001 firmware in this USB storage device, the EG8001 router will automatically update the
configuration file or the firmware. For more details, see
3.11 Interface > USB
.
Each Ethernet port has two LED indicators (please check the picture above). The yellow one is Speed indicator and
the green one is Link indicator. There are three status of each indicator. For details please refer to the form below.
Indicator
Status
Description
Speed Indicator
Off
10 Mbps mode.
On
100 Mbps mode.
Link Indicator
Off
Connection is down.
On
Connection is up.
Blink
Data is being transmitted
USB
Ethernet Ports
