ROBUA G Series, Installation, Use And Maintenance Manual

Page: 31 / 48

Normal operation
Installation, use and maintenance manual – G gas unit heater
31
6
12. Press the key to exit the programming mode.
How to check the daily setpoints you have set
1.
Enter programming mode by shortly pressing the
key.
2.
Press the key repeatedly.
3.
On the lower left of the display, the message SP n will
appear, where n indicates the number of the daily set-
point (Figure 6.3 p. 30).
4. Select the desired day of the week using the key.
5. Scroll through the setpoints using the and
keys.
6. Press the key to exit the programming mode.
6.3.5
Choice of a preset daily profile on the
chronothermostat
1.
Enter programming mode by shortly pressing the
key.
2.
Press the key repeatedly.
3.
DAY will appear in the lower left corner of the display.
4.
Press the key and select the desired day of the
week.
Figure 6.5
Daily profile
5.
On the top right of the display, the word PROFILE and
the number of the selected profile will appear flashing
(Figure 6.5 p. 31).
6.
By pressing the and keys you can select
the daily profile from the 16 available (see Table
6.1 p. 32).
7. To confirm press the key.
Confirming with the key causes the loss of the
daily profile previously set for the same day.
8. Press the key to exit the programming mode.
6.3.6
Choice of a preset weekly profile on the
chronothermostat
1. Enter programming mode by shortly pressing the
key.
2. Press the key repeatedly.
3. WEEK will appear in the lower left corner of the display.
4. On the top right of the display, the word PROFILE and
the number of the selected profile will appear flashing
(Figure 6.6 p. 31).
Figure 6.6 Weekly profile
5.
By pressing the and keys you can select
the weekly profile from the 16 available (see Table
6.2
p. 32). Each weekly profile is a collection of 7 pre-
set daily profiles.
6.
To confirm the selected weekly profile press the
key.
Confirming with the key causes the loss of the
weekly profile and the daily profile previously set.
We recommend that you choose the weekly pro-
file that comes closest to your needs and then, for
the days when you do not want the daily profile
set in the weekly profile, set, as described in the re-
spective paragraph, the desired preset daily profile
(see Paragraph 6.3.5 p. 31) or proceed to the free
programming of the daily setpoints (see Paragraph
6.3.4 p. 30).