Once alignment is properly done, gently push the center of the horn toward the actuator. Make
sure that the horn washer is in place as you tighten the bolt.
4. 1. 2. Installing the Bearing Set
You may need to remove the bearing set from the previous actuator and reinstall it into the new
actuator. The bearing set can also be purchased separately. As bearing set is rotating freely,
therefore alignment is not required when assembling to DYNAMIXEL.
NOTE
5. 1. Certifications
Please inquire us for information regarding unlisted certifications.
5. 1. 1. FCC
Note
: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
