3
Pre-Construction Information:
Before assembling your Botster™ kit, get familiar with the material below so you will
better understand the nomenclature used in this guide.
Botster™ Screw Types and Sizes:
Button Head Cap Screw (BHCS):
6-32 x 1/2” (For wheel encoder modules and rear caster)
Flat Head Cap Screw (FHCS):
6-32 x 1/2” (Chassis, servos)
6-32 x ¼” (Colored trim pieces)
6-32 Nut:
(wheel encoder modules, and caster)
TOOLS:
You will need the following common hand tools to fully assemble your Botster™ kit.
•
Combination hex wrench set (Specifically 5/64” & 7/64” size wrenches)
•
Phillips head screwdriver
•
Razor Blade, utility knife, or xacto knife
©2004-2005 Summerour Robotics Corporation – Botster™ Assembly Manual Version 1.4 – 05/15/2005.
Botster™ and Botster Brand™ are Trademarks of Summerour Robotics Corporation 2004-2005.
