Robot Coupe CL50 Gourmet, Manual

Page: 9 / 19

20
2) Remove the disc by lifting it from under-
neath using the hub and if necessary, turn in an
anti-clockwise direction to release…
If you have been using a dicing unit, we
recommend you remove the grid and the disc at the
same time. This will be easier if you first rotate the
emptying disc.
3) When fitting dicing equipment, we recommend
that you clean the inside of the bowl with a damp
cloth or sponge, particularly the part onto which the
grid is to be fitted.
always use a properly cleaned grid.
Never process soft foodstuffs after hard ones wit-
hout properly cleaning the grid beforehand.
4) Fit the discharge plate, disc or dicing equipment
as indicated in“assembly procedures” in points 1)
and 2).
5) Close the lid of the vegetable preparation
machine and lock onto the motor base using the
fastening hook.
uses aNd
choIce of dIscs
The lid of the vegetable processor features two feed
openings:
-
a wide feed
opening for processing vegetables
such as cabbage and celery.
- a narrow feed opening for long vegetables,
guaranteeing a remarkable degree of cutting
precision. Cutting quality can be optimized if the
compartment is used as a cutting guide.
4) Position the head of
the vegetable prepa-
ration machine on the
motor shaft. The faste-
ning hook should now
be facing you, on your
right.
To chaNge The dIsc:
1) With the motor base
facing you, use your
right hand to undo the
aluminium fastening
hook which holds the
vegetable preparation
head on the motor base.
Lift the vegetable pre paration head, tilting it back to
release the bowl.
3) Position the head of the vegetable preparation
machine on the motor shaft. The fastening hook
should now be facing you, on your right.
e) you only need to process small amounts :
When processing small amounts, we recommend
you use the receiver tray.
With the motor unit
facing you, place the tray
at the bottom of the bowl.
Position the disc of your
choice on the motor
shaft. Maximum capa-
city: 600 g diced pota-
toes (3x3x3 mm).
If you have trouble removing the disc, simply push
the tray up with your hand to free the disc from the
motor shaft.
W a r N I N g
The receiver tray cannot be used with the
dicing or french fries equipments.