Robot Coupe CL50 Gourmet, Manual

Page: 7 / 19

18
If you have more than 4 pins in the plug please
note the ROBOT-COUPE does not require a
neutral
wire.
switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise
direction.
On the motor unit, a red arrow marks the blade
rotation direction. If the blade turns in a clockwise
direction, swap over two wires :
since greeN/yelloW is the earth,
do NoT dIscoNNecT.
Swap either : the
➊
and the
➋
the ➊ and the ➌
the ➋ and the ➌
assembly
1) With the motor base
facing you, place the
discharge plate on the
bottom of the bowl.
SIDE A facing upwards (ejection rib
downwards) for any vegetables or
citrus fruit which require careful
handling (tomatoes, mushrooms...).
SIDE B facing upwards (ejection rib
upwards) for all other types of fruit
or vegetables.
cl 50 gourmet single-phase
The CL 50 Gourmet is fitted with various types of
motors : 230 V / 50 Hz /1
120 V / 60 Hz /1
220 V / 60 Hz /1
The machine comes with a single-phase plug
conn ec ted to a power cord.
cl 50 gourmet
Three-phase
The CL 50 Gourmet is fitted with various types of
motors :
400 V / 50 Hz /3
220 V / 60 Hz /3
380 V / 60 Hz /3
The machine is supplied with a cable to which you
simply attach the appropriate electrical plug for
your system. The cable has four wires, one earth
wire, plus three phase wires.
If you have a 4-pin plug :
1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.
INTroducTIoN To your
NeW cl 50 gourmet
vegeTable preparaTIoN
machINe
The CL 50 Gourmet is perfectly geared to profes-
sional needs. It can perform any number of tasks,
which you will gradually discover as you use it.
This model is equipped with a metal bowl and a
stainless steel motor base.
Thanks to its simple design, all components requiring
frequent handling for maintenance or cleaning can
be fitted and removed in a trice.
This manual contains important information designed
to help the user get the most out of this vegetable
preparation machine.
We therefore recommend that you read it care-
fully before using your machine.
We have also
included a few examples to help you get the feel
of your new machine and appreciate its numerous
advantages.
sWITchINg oN
The machINe
• advIce oN elecTrIcal
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
identi fication plate.
W a r N I N g
ThIs machINe musT be earThed
(rIsk of elecTrocuTIoN).
6
1
7
4
2
1
2
3
6
7
4
5
5
3
4
Large half-moon feed opening
Cylindrical feed tube
Food guide insert
Food guide pusher
Fastening lug
Receiver tray
Large feed opening pusher