11
ENGLISH
MAIntenAnCe
• MOtOR SeAl
The motor seal on the shaft should be lubricated
regularly using a food safe lubricant.
In order to keep the motor completely watertight,
it is advisable to check the motor seal regularly for
wear and tear and replace if necessary.
The motor seal can be easily replaced without
having to remove the motor, so we strongly advise
you to ensure that is in good condition.
• BlAdeS And plAteS
The blades on all our discs are wearing parts that
need to be replaced from time to time, in order to
maintain consistently high cutting quality.
• gRAtIng dISCS
Grating discs deteriorate over time. We recommend
you replace them from time to time, in order to
maintain consistently high cutting quality
teCHnICAl
SpeCIfICAtIOnS
• WeIgHt (lbs)
Net
Gross
CL 55 without a trolley 60 73
Motor base
40 42
Pusher feed-head
20 31
Hole feed-heads
19 23
Automatic feed-head 13 15
Stainless steel stand
22 23
Disc
1.1 1.3
• WORKIng HeIgHt
the Cl 55 is mounted on a stainless-steel base,
which we advise you to place on a stable surface.
The included stainless steel stand positions the
machine at the ideal working height.
• nOISe leVel
The equivalent continuous sound level when the CL 55
is operating on no-load is less than 70 dB (A).
SAfetY
Check that your detergent is suitable for
cleaning plastic parts. Some washing agents
are too alkaline (e.g. high levels of caustic
soda or ammonia) and totally incompatible
with certain types of plastic, causing them to
deteriorate rapidly.
I M p O R t A n t
the discs are extremely sharp.
Handle with care. Always use cutting gloves.
W A R n I n g
the Cl 55 is fitted with magnetic safety system
which stops the motor as soon as the large hopper
or lid is opened, thus preventing any access to the
cutting tool while it is in motion.
As soon as the lid opens, the motor stops.
To restart your machine, simply relock the lid and
press the green switch.
When using the hopper equipped with a lever, the
motor is stopped as soon as the lever is removed
from the bowl. To start the machine again, you
should simply position the lever at the aligned with
the base of the bowl.
The
Cl 55
is fitted with a
temperature fuse
which
automatically stops the motor if the machine is left on
for too long or overloaded. If this happens, allow the
machine to cool completely before restarting.
The hinge pin must be fitted in its position at the back
of the motor unit before the machine is switched on.
do not open the lid until the motor has come
to a complete stop.
never tamper with the locking and safety
systems.
never put a hard or non-food object in the
bowl while the machine is operating.
never force the ingredients down with your
hands.
do not overload the machine.
R e M I n d e R
