Robopac SPIROR DR, Use And Maintenance Manual

Page: 8 / 95

SPIROR HP - DR
2. SAFETY INFORMATION
2.1. GENERAL SAFETY PRECAUTIONS
― Carefully read the “Directions for use”, paying particular attention to the “Residual risks”.
― Pay attention to the safety warnings.
― Use the machine only for the use for which it is designed.
― Sometimes, accidents can be caused by a "careless" use of the machine by the operator.
― Pay maximum attention.
― Preserve the readability of the information signs and observe the indications given.
― Do not tamper with the safety devices and protections.
― The personnel authorised to carry out any operation on the machine has to be adequately trained.
2.1.1.EMPLOYER OBLIGATIONS
― The operator must possess the required training and meet the suitable conditions for carrying out the
activities in safety conditions.
― The employer must inform the operator on the INCORRECT USES predictable and on the persistent
Residual risks.
― The operator must be capable of reading and understanding the user manual and must easily identify
the safety signs.
― The employer must adequately document the training obtained by the operators.
2.2. SAFETY WARNINGS FOR HANDLING AND INSTALLATION
― The personnel authorised to handle the machine (loading and unloading) must possess particular
expertise in the field of intervention.
― Carry out handling (loading and discharge) according to the information delivered together with the
product.
― During handling use one or two assistants, if required. This operation may generate unpredictable risks.
― In order to minimise the risks related to assistants' involvement, you must inform them priorily on the
type of work and the behaviour to be used.
― The machine must be handled with the aid of specific means (crane, forklift etc.) by qualified personnel
capable of observing the safety requirements.
― When using the lifting means, insert and/or fasten the devices (hooks, forks etc.) ONLY into the points
provided on the package and/or the machine.
― Transport the machine suitable means of adequate capacity.
― The minimum and maximum temperature (during transport and/or storage) must fall within the range
allowed in order to prevent damaging the electrical components.
― Install the machine ONLY in spaces free of explosion and /or fire risks.
― Avoid the spaces exposed to atmospheric and corrosive agents.
― Assess, prior to installation, if it is necessary to draw up a "safety plan" in order to protect the safety of
the personnel involved.
― Ensure suitable safety conditions for carrying out works at height in areas difficult to reach or however
dangerous.
― Install the machine according to the minimum perimeter indicated by the manufacturer and the
surrounding activities.
― Should the machine interface directly/indirectly with other machines or production lines, draw up the
installation design of the machine.
― The design must include all the operating conditions in order to comply with the standards in force on
safety at work place.
― Check that the installation space is properly ventilated in order to avoid air concentration unhealthy for
the operators.
― Apply the most suitable solutions for reducing the noise levels and the acoustic pollution to minimum.
― Carry out the electrical connections professionally and in full compliance with the instructions provided
by the manufacturer and the specific regulations in force.
English
8/95