RoboBuilder DIY Robot kit, User Manual, Page: 71 / 110

72
Setting Robot Platform
Appropriate platform type(HUNO, DINO, DOGY) should be set on the control box before connecting
RoboBuilder with a PC. For example, it your robot is a HUNO but control box is set as DOGY platform,
the robot won
’
t operate properly. Robobuilder will think the robot is in the form of the configured
platform. Below is how to set and check the correct robot platform type on control box.
In case your robot is a non-standard platform(other than HUNO, DINO, and DOGY), press PF2 button
for 3 seconds until PF2 LED turns on orange.
HUNO - PF1 turns on blue LED
DINO - PF1 turns on pink LED
DOGY - PF1 turns on red LED
Press PF1 button
for 3 seconds
Press PF1 button
for 3 seconds
Press PF1 button
for 3 seconds
Non-standard platform - PF2 turns on orange LED