RoboBuilder DIY Robot kit, User Manual, Page: 106 / 110

107
Chapter 4. Troubleshooting
If needed, disassemble the required parts and correct the joint direction problem.
Refer to Chapter 2 and video version building instructions.
Check each wCK modules cable connection to make sure all cables are connected to control box.
[Troubleshooting]
[Troubleshooting]
STEP 05
Are joints inserted with correct direction?
In some body parts, if joint part is not inserted with the correct direction, the robot may not operate
properly. The following building steps are where users frequently make mistakes.
HUNO
Leg Part(STEP07,08)
DINO Leg Part(STEP06,07)
DOGY Leg Part(STEP05,06)
STEP 06
Are all cables connected?
If any of the 16 wCK module cables are not connected, the robot won
’
t operate properly.
※ If the robot still doesn
’
t operate properly after check all the 6 STEPs above, please contact your
local Customer Center for technical support.