Robland E2800, Manual

Page: 5 / 65

4
V0913 E 300 / E 2800
English Deutsch
Prohibited use
Following tasks are prohibited on the panel saw :
Submerged cuts by removing the riving knife and/or guard;
All types of cuts without using the table saw fence, the 90° fence or sliding table;
Cutting large workpieces that exceed the machine capacity without using aids such as roller
supports.
Remaining risks
Main risks on the panel saw are :
Unintentional contact of the hand with the running sawblade;
Workpiece kickback
Tipping of the workpiece due to insufficient support.
Noise reduction
The type and condition of the sawblade is important in keeping the noise level as low as possible.
The material and the position of the safety devices are important in reducing the noise level.
Using the correct speed of the sawblade for the type of material will reduce the noise level as well.
The above does not negate the fact that extra safety equipment such as ear protection must be
used.
Operating instructions
The following recommendations for safe working procedures are given as an example, on top of all
information characteristic of this machine.
When working with the machine, safety equipment must be used.
Nevertheless, the user must also follow the operating instructions to avoid accidents.
traInIng oF MaChIne users
It is absolutely essential that the panel saw user receives thourough training regarding operating and
adjusting the machine.
In particular:
the risks involved in working with the machine;
the operating principles, the correct usage and adjustment of the machine;
the correct choice of the tools for each operation;
the safe handling of parts to be processed;
the position of the hands in relation to the sawblade;
storing the workpieces safely before and after sawing them.
staBIlIty
In order to be able to use the machine safely, it is essential to place it stably on the ground or other
stable surface.