Robitronic
Pro-Master Manual
Operating Instructions
8
Starting the measurement
--Motor Check --
[Start]
start measurement
2:Start Test
[Mode]
next function
Check whether the flywheel has been firmly mounted to the motor armature with the hex (Allen)
screws.
Retighten the thumbscrews holding the test motor.
Maintain a safe distance of at least ½ meter from the rotating flywheel.
Press the
[Start]
key to begin measurement.
--Motor Check --
[Start]
terminate measurement
Running ........
[Mode]
terminate measurement
Measurement can be terminated at any time by pressing any key.
--Motor Check --
Calculate Pass15
Next comes the calculation of the motor's characteristic curve, followed by automatic display of
maximum values (see next section, "Display of motor data").
Starting another measurement
--Motor Check --
2:Please Wait30s
[Mode]
next function
After termination of a motor check, a further measurement is blocked for 30 seconds; i.e., a
measurement can be started at most once every 30 seconds.
