manualshive.com logo in svg

Robitronic Pro-Master, Manual, Page: 24 / 35

Share
Download
Robitronic Pro-Master Manual Download Page 24

 Robitronic

Pro-Master Manual

PC Software

24

Display modes for motor data

The motor data are loaded from the hard disk and displayed on the screen. You can choose from
among five different display modes (views) for the motor's characteristic curve. The usual view
depicts the relationship of the values of RPM; i.e., horizontally (on the X-axis) we have either RPM
or nondimensional RPM. Switch between RPM and nondimensional RPM with function key [F11].
The view with nondimensional RPM assumes the maximum RPM to be 100%. This simplifies the
comparison of motors with different RPMs. Select another mode using the menu item <View>.

RPM %

Default setting uses nondimensional RPM on the X-axis; ideal for graphical
comparison of several groups of motor data.

RPM

View motor data via RPM.

Torque Nmm

View motor data in relation to torque:

Amps A

View motor data in relation to motor current. This view enables, e.g., a
simple comparison for a given current value (current limitation).

Time s

View motor data in relation to time.

Summary of Contents for Pro-Master




































Reviews:

No comments