Robitronic
Pro-Master Manual
Operating Instructions
15
Charging battery packs
Preparing to charge a battery pack
To use the battery pack charging function, you need a 12-volt lead-acid battery or a stabilized power
supply. Connect to the supply voltage to Pro-Master main unit using the battery clips.
The battery pack to be charged is connected to the socket labeled "Output" and the temperature
probe (with clip attachment) to the "Sensor" socket on Pro-Master.
Selecting the charging function:
-- Main Menu --
2:Charge Battery
The charging function is selected in the main menu by pressing the [Start] key.
Selecting a charging program
- Charge Menu -
1:Start Progr: 1
This function invokes a battery pack charging program. The [+] and [-] keys allow you to select
from among five charging programs. Pressing the
[Start]
key launches the charging program.
With menu item 2 "Set up charge" you can modify the charging programs. This allows you to set
different charging currents and cutoff methods to match your applications.
Start charging
After selecting a charging program, you can initiate charging by pressing the
[Start]
key again.
L 21.4/p15 00:00
0.0A 0.0V 0000
Pressing the
[Mode]
key terminates charging.
