10ft Wide Polytunnel Assembly Instructions
Copyright © Robinson Polytunnels 2009 - 2018
20
9
Continue around the corners, pulling the polythene towards to doorway.
10
Now fix the polythene to the door posts. The polythene
is pulled into the doorway and pleated. Trap the
polythene behind the batten as you nail the batten into
the rebate. Use 50mm long nails at about 10cm apart.
Tip! Fold the pleats “downwards” so that they
don’t collect rainwater.
Tip! Pre-nail the battens so they’re ready to fix
the polythene quickly.
11
Trim off the surplus polythene in the doorway.
12
Raise the inner hoops to tension the polythene.
Summary of Contents for 10ft Wide Polytunnel
Page 1: ......
