10ft Wide Polytunnel Assembly Instructions
Copyright © Robinson Polytunnels 2009 - 2018
18
4
Start back-filling the trench along the sides of the polytunnel,
working from the centre towards each end. Try to get the
polythene tight by pulling on the surplus polythene as you fill
the trench. Continue right up to the door posts, pulling the
polythene towards to doorway.
5
Now fix the polythene to the door posts. The polythene
is pulled into the doorway and pleated. Trap the
polythene behind the batten as you nail the batten into
the rebate. Use 50mm long nails at about 10cm apart.
Tip! Pre-nail the battens so they’re ready to fix
the polythene quickly.
Tip! Fold the pleats downwards so that they don’t
collect rainwater.
6
Trim off the surplus polythene in the doorway.
Tip! To avoid the back-filled trench becoming
water-logged, prick the polythene at the
bottom of the trench with a garden fork.
7
Raise the inner hoops to tension the polythene.
Summary of Contents for 10ft Wide Polytunnel
Page 1: ......
