5
To adjust the height of individual draws (±2.0mm) simply adjust the position of the screw as shown below.
The handles are to be connected to all three drawers of the Robinhood Workstation.
o
To fix handles to the drawer, firstly clear the existing holes from the front using the screws supplied. Insert
screw & washer from the inside (back of the draw front) of the drawer, place handle on the outside of the
drawer front and secure in three locations. Be careful not to scratch the drawer fronts whilst installing the
handles.
Connecting the washing machine – continued
4.
Place the black rubber waste hose protector
I
along the edge between the waste hose and the internal bracket.
5.
On completion of the installation check the complete system for water leaks. Ensure there is adequate fall on
the waste hose to prevent moisture being trapped inside the hose.
Notes:
o
Please remember to fill out the details on the warranty certificate (do not post).
o
Remove any plastic coating from the product.
Adjusting the height of the drawers and fixing the handles
I
Summary of Contents for ST9000W
Page 9: ...9 Fit out sheet ...