ROBINHOOD ST9000W, Installation And Operating Instrictions, Page: 4 / 10

4
Connecting the washing machine
The washing machine waste hose can be connected to either side of the Robinhood Workstation.
1. Place the washing machine waste connector from inside the Robinhood Workstation to the required side hole,
either left or right, fastening it from the outside with the three screws supplied
G
. Insert the decorative caps
supplied from the installation kit into all other side panel holes
Important:
Ensure the washing machine outlet hose is correctly fitted at both ends and that the spring clips are firmly in
place to prevent leaks.
2. To prevent the washing machine waste hose from coming loose use the cable tie provided to fasten the hose
firmly to the washing machine waste connector.
Cable tie
Washing machine outlet hose
Washing machine waste hose
3. Knock out the centre of the two decorative caps that you wish to pass the washing machine inlet hoses through
(use the washing machine hose supplied if required). Pass the hoses through the holes and fasten them firmly
to isolation valves
H
.
Note: Rear flange and mains hoses have been removed for better visibility.
G
H