10
Important:
o
Please refer the following AS/NZ Standard for the correct installation of the unit in particular to the following
sections
o
AS 2887-1993 : Plastic Waste Fittings
o
The pipe work between the waste outlet elbow and the tee for the suds saver has to have a fall of between 1.5-5
degrees ( as per Standard) on final installation of the unit in a domestic house (see image below).
o
AS/NZS 3500.5:2000 : National Plumbing and Drainage - Domestic installations
o
2.7 ISOLATING VALVES
o
The flow from any water mains supply to any water service pipe, including the flow within the water service pipes,
shall be controlled by means of isolating valves, fixed in the following locations (f) at each appliance.
o
4.35.2.7 Laundry troughs (tubs)
o
Laundry troughs (tubs) shall be fitted with a minimum DN 40, trap and discharge pipe unless connected to a floor.
o
4.35.2.10 Clothes-washing machines
o
The pumped discharge from domestic clothes-washing machines shall be connected (see Figure 4.35.2.10)—(b)
into a trapped waste pipe.
o
Please read the entire instructions before installing the laundry tub.
Tap
AS/NZS3718, ASNZS 6400 WELS
3-Way ball valve
ATS 5200.012
Flexible hoses
AS3499
Waste system
AS/NZ2887, AS3500
Tub / trough
AS/NZS1229
Pre Installation instructions Australia
Product Approvals Australia MP52, ATS 5200 and WELS 6400
ECN: 07034
New Zealand
Robinhood Ltd
Telephone: 0800 760 667
Facsimile: 0800 276 246
Email: [email protected]
www.robinhood.co.nz
Australia
Robinhood PTY Ltd
Telephone: 1800 648 556
Facsimile: 1800 628 577
Email: [email protected]
www.robinhood.com.au
ECN: 09 039
Summary of Contents for ST9000W
Page 9: ...9 Fit out sheet ...