Instructions for use and maintenance
Safety switch off
Maximum continuous operation of a particular hotplate is limited, and the duration is displayed in the above chart. When
the hotplate is switched off by the safety mechanism, the indicator displays symbols “0”, or “H” in case there is any
remaining heat left.
In such cases switch the hotplate off by touching the relevant power setting sensor (B).
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do not change the above setting, the safety
mechanism will switch the hotplate off after 4 hour and a half.
Protection form overheating
Induction hotplate is also fitted with safety device against overheating which protects electronic parts from damages.
This device operates on several levels. When temperature of the hotplate excessively rises, it switches on two-stage
fan. If this is not enough, extra powerful heating is deactivated, and finally the safety device either reduces the heating
power of certain hotplates or turns them off completely. When the hotplate cools off, the full power of hotplate is again
available.
Timer
Use of timer facilitates cooking by setting the time of hotplate operation.
Turning timer on
•
Select the hotplate to be timer controlled, the respective decimal
point (E
1
) lights and timer display shows "CL".
•
Turn the timer on by touching the timer ON/OFF sensor (F), at the
beside of timer’s display, the light of the cooking zone of which timer
is being set turns on.
•
First the regulation of the second digital number has place and then the one of the first digital number (the active
number is displayed by the symbol “-“ when the regulation starts).
•
By sliding along the entire slider, the exact tie can be set. By sliding to the right, the time increases, while sliding to
the left decreases the time setting by one minute steps.
•
When you remove the finger, after a few seconds the timer starts the countdown. Indicator displays actual power
setting, and the dot beside of timer’s display indicates that timer is on.
Operation time can be set for each hotplate separately, Changing preset cooking time
Cooking time can be changed anytime during the operation.
•
Select desired hotplate, the respective decimal point (E
1
) lights, residual time is displayed on timer’s display.
•
Touch the timer ON/OFF sensor (F).
•
By sliding along the entire slider area (B), the cooking time is changed by one minute steps.
•
When you move your finger away from the slider, the cooking filed starts operating with the newly set cooking time.
•
If time is not modified in 10 seconds since pressing the sensor (F), timer goes to zero and then turns off
Automatically.
Power setting
1
2
3
4
5
6
7
8
9
Maximum
power cooking
time (min.)
0,8
2,4
3,8
5,2
6,8
2,0
2,8
3,6
0,2
Power setting
1
2
3
4
5
6
7
8
9
Hours lapse prior safety
switch off
6
6
5
5
4
1.5
1.5
1.5
1.5
