Instructions for use and maintenance
Checking remaining cooking time
•
Last set timer is always displayed .
•
Select cooking zone. The residual time of selected cooking zone will be displayed on timer’
Turning time off
When preset time elapses, a beep signals the end, and the hotplate is switched off. Switch off the alarm by pressing the
sensor of switch-off timer (F),or it switches off automatically after 2 minutes.
If you want to switch the timer prior to preset time
•
Select desired hotplate, the respective decimal point (E
1
) lights. Cooking’s residual time is displayed on timer’s
display.
•
Touch the timer ON/OFF sensor (F).
•
Pressing on the far left side of the slider deactivates the timer and the time set. The time setting can also be reset
by sliding along the entire slider area by 1 minute decrements.
•
The illuminated point on the left part of the display is turned off and the timer is deactivated.
Alarm timer function
Timer can be used as alarm only if it is not already employed in timer
control of one of the hotplates.
Timer setting
With the hob off:
•
Touch the hob ON/OFF sensor (A) to activate the cooking hob.
•
Touch the timer ON/OFF sensor (F) to activate the timer.
•
Sliding a finger on slider area (B), set desired time.
•
Values of zones’ Cooking levels can be set:
•
Before the first decimal number stops flashing (2 seconds).
•
After setting alarm functions (cooking zones’ displays turn off), it’s enough pressing sensor (A) again.
Switching the alarm off
When the preset time expires a beep is heard which you can either turn off by touching any sensor or leave it to turn off
automatically after 2 minutes.
If you want to switch the timer off prior expiry of preset time:
•
Touch the timer ON/OFF sensor (F).
•
Pressing on the far left side of the slider. Alarm function is off.
•
During the time the alarm is activated, timer can not be preset for any hotplate. To enable timer setting function,
alarm must be switched off.
Prerequisites for configuration/deleting (configuration)
All pans must be removed from cooking zones and one suitable
for induction must be available.
It’s possible starting configuration/deleting within 2 minutes after
connection to power mains.
Touch control and all displays must be turned off.
