7
Sw Upd
-
Graphical software update.
The item starts update of the graphical software in the fixture.
Insert the USB flash drive with update files into USB port, select this option and press [ENTER]. Version of the
new software will be displayed, eg, v 003 ?.
If you want to run update, press [ENTER] again.
HW Upd
-
HW processors Software update.
The item starts update of hardware functions like pan, tilt,
focus...etc. and should be performed after graphical
software update
6. Keystones
If an image is output from the Robin MiniMe at an angle the image may be skewed. Two keystone channels
(KeyStoning Vertical, KeyStoning Horizontal) adjust the image shape. Default DMX value for both channels is
128, it means that no keystone correction has been used.
The keystone values can also be used to create interesting skewing effects.
The option "Save AutoKeystoning" from DMX chart (channel Special functions, range 230-234) allows to save
adjusted values of the keystone channels and correct them automatically when head position is changed:
First use the Keystoning Vertical channel and the Kyestoning Horizontal channel to adjust image shape, after
that go and stay at this DMX range for 3 seconds to write keystoning values into memory. To activate Auto
-
Keystoning, set channels Horizontal and Vertical Keystoning to 0. Now, if you move with the fixture head on
another place in the same plane, the image shape will be automatically corrected.
If you move the head in a tilt into oposite position, the image shape will be automatically corrected again and
image will not be turned:
Summary of Contents for Robin MiniMe
Page 1: ... Working version ...
Page 22: ...22 ...
