Robin Robin MiniMe, User Manual

Page: 14 / 22

4
5. Control menu
The Robin MiniMe is equipped with 2-row LCD display which allows to set the fixture´s behaviour according to
your needs, obtain information on its operation, test its various parts and lastly program it, if it has to be used
in a stand-alone mode.
Control panel:
[ESCAPE] button used to leave the menu without saving changes.
[NEXT] , [PREV] buttons for moving between menu items and for value adjusting.
[ENTER] button used to enter the selected menu (menu item) and to confirm adjusted value.
After switching the fixture on, display shows current DMX address.
5.1 Addressing (DMXA)
Mode
-
Set operating mode.
Use this menu item to set DMX operating mode (" DMX") or ArtNet operation mode
("ArtNet"). If the ArtNet mode is selected, DMX address (D 001) and Universe (U 000) are shown by rotation.
IP Addr - Set IP Address. Use this menu to set desired IP address of the fixture.
IP NetM - Set NetMask. Use this menu to set desired NetMask of the fixture.
DMX Addr - Set DMX address. Use this menu item to set desired DMX start address of the fixture, which is
defined as the first channel from which the Robin MiniMe will respond to the controller.
If you set, for example, the address 23, the Robin MiniMe will use channels 23 - 54 for control. Please, be sure
that you do not have any overlapping channels in order to control each Robin MiniMe correctly and indepen -
dently from any other fixture on the DMX data link.
ArtN Uni
-
Set ArtNet Universe.
Use this menu item to set desired ArtNet Universe.
Note: If default values are loaded from the menu Personality, the default IP address of the fixture is set.
5.2 Fixture information (Info)
POn Time - Power on time . Select this menu to read the number of fixture operation hours.
Total - The item shows the total number of the operation hours since
the Robin MiniMe has been fabricated.
Reset - The item shows the number of the operation hours that the
Robin MiniMe has been powered on since the counter was last reset.
In order to reset this counter to 0, press and hold both [NEXT] and [PREV] buttons and the
[Enter] button at the same time.
DMX In - DMX readout.
The menu is used to read DMX values of each channel received by the fixture.
Temp
-
Temperature
. The menu shows temperature in the fixture.
Head - A temperature in the fixture head.
CPU - A temperature on the CPU
Sw Ver - Software versions . Select this item to read the software version of the fixture modules.
GE - A graphic engine
IC-1 - A pan/tilt and zoom module