Robin Robin MiniMe, User Manual

Page: 16 / 22

6
Rc DMX Prg - Record DMX program . The menu allows you to record DMX data that receives the fixture and
then replay them again via the menu “PL. DMX Prg”. There is a list of 9 programs for recording.
5.6 Reset (Reset)
This option enables to index all effects and return them to their standard positions.
Reset GE - reset of the graphic engine module.
Reset P/T - reset of the pan/tilt module.
Reset Focu - reset of the focus module.
Reset All - reset of all fixture modules.
5.7 User Media (User Media)
Used media files can be saved in the fixture memory or can be called from the external USB drive.
No USB
- This item will appear if no USB flash drive is connected.
Init USB - This item will appear if an USB flash drive without desired folder structure is connected. Press [EN -
TER] to start initialization. Initilization process creates folder called ‘minime’ in the root folder of the USB flash
drive. Inside this folder are three subfolders: extmedia, intmedia, update.
Top level folder
minime
extmedia
intmedia
update
exmedia
- the folder for media files which will be played directly from this folder.
intmedia
- the folder for media files which will be loaded into fixture memory.
update
- the folder for update file.
These folders structure may be also created by means of your computer, but exactly the same names and
small letters have to be kept.
The media files should follow the 3-digit conventions where a 3-digit number is followed by an underscore and
a name e.g.: 001_testfile1.jpg, 002_landscape.jpg...... Max. number of media files in folder is 250.
The images can be in jpg format (1280x800 max) and the videos in mpeg4 or avi format.
Mirror Media - This function loaded files from the folder intmedia into fixture´s memory.
Note: All media files in the fixture memory will be overwritten.
Delete Int. Me.
- This menu delete media files in the fixture´s memory.
5.8 Special functions (Special)
Calib - Fine calibration . The menu allows the fine adjustment of the pan, tilt, focus and Gamma curve.
Calibration of pan/tilt/focus/gamma curve via the control board
1. Disconnect DMX controller from the fixture and enter the "Calib" menu.
2. Use the [PREV] and [NEXT] to find "Pan" and press [ENTER].
3. Set desired value and save it by pressing [ENTER].
4. Repeat steps 2 and 3 for tilt, focus and Gamma curve.
5. After calibrating all effects, find item "Store" and press [ENTER]. to save all adjusted values and reset the
fixture.
Note: you can also use DMX controler for calibration stated above, calibration protocol is the following:
Effect Channel
Pan-fine adjustment channel 25
Tilt - fine adjustment channel 26
Focus - fine adjustment channel 27
Gamma curve- fine adjustment channel 28