- 24 -
6-9..IDLE.CONTROL.(OPTIONAL.EQUIPMENT)
(1)..ENGINE.SPEED.IS.NOT.INCREASED.
WHEN.A.LOAD.IS.APPLIED
1) Check the wattage of load applied to the
generator . If the generator is loaded over
the rated wattage, the engine speed can
not be increased . Most induction loads such
as electric motor or electric tools or welding
machine require three to five times large
wattage of their ratings at starting . This
starting wattage must not exceed the rated
output of the generator .
2) Check the slow set r .p .m .
The normal idling speed by the IDLE
CONTROL is as follows :
RGX7100/7800 (USA model) . . . 2100 to 2500 r .p .m .
The above speed setting is for cold
engine condition . If the engine speed is
out of adjusting range, move the solenoid
backward .