- 31 -
5-4-7 BLOWER HOUSING
Installing the blower housing.
Blower housing tightening torque
M5 x 18 mm Screw : 3 pcs. (EH025)
M5 x 16 mm Socket hesd bolt : 4 pcs. (EH035)
Tightening torque : 4 - 5.5 N
・
m
(40 - 55 kgf
・
cm)
(2.9 - 4.0 ft
・
lb.)
Fig. 5-38
5-4-8 CAM GEAR
Installing the cam gear.
(1) Align the mark punched on the flywheel (key
position groove) with the timing mark on the
ignition coil.
Fig. 5-39
Fig. 5-40
(2) Install the cam gear with the cam top facing
down vertically (use the timing mark for
reference).
Fig. 5-41
TIMING MARK
TIMING MARK
BLOWER HOUSING
M5 SCREW AND
WASHER : 3 pcs.
CAMGEAR
SHAFT,
CAMGEAR
