Roberts Stream 93i User Manual Download

Page: 89 / 104

Display and Audio

Line out socket (3.5mm Jack)

A 3.5mm

Line Out

socket

located on the rear of your sound system is

provided for connecting the audio signal to an external ampli

er. Inserting

an audio cable into this socket will not mute the internal loudspeaker. Set
the volume control on the sound system to minimum if desired.

Headphone socket

A 3.5mm

Headphone Socket

located on the rear of your sound system

is provided for use with headphones. Inserting a plug automatically mutes
the internal loudspeaker.

Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting volume to a low level before connecting
headphones to the sound system.

IMPORTANT:

Excessive sound pressure from earphones and headphones

can cause hearing loss.

To prevent possible hearing damage, do not listen at high
volume levels for long periods.

Summary of Contents for Stream 93i









































































































Search results

Summary of Contents for Stream 93i

Reviews:

Related manuals for Stream 93i

Brands by name

Popular brands

Roberts Stream 93i, User Manual

Search results

Summary of Contents for Stream 93i

Reviews:

Related manuals for Stream 93i

Brands by name

Popular brands