Music Player
Wake On LAN
If you are using a computer as a UPnP server for playing your music
fi
les
via your sound system, you may not wish to keep that computer operating
when you are not listening via your sound system. If your computer is suitably
con
fi
gured, it can either shut down, or enter a Standby or hibernation state
when it is not being used.
Your sound system can wake up a computer which has shut down using a
Wake On LAN command via the network provided that the sound system
has previously connected to a UPnP server application on that computer. A
computer which is not currently active will be shown with a question mark in
the list of UPnP servers.
Many computers will not respond to Wake On LAN commands from the sound
system in all modes, and may require software, device driver, BIOS, hardware or
router con
fi
guration changes for this function to operate. Failure of a computer
to respond to Wake On LAN is not considered a fault of the sound system.
Prune servers
Prune shared media
wake on LAN servers?
USB playback
My playlist
Repeat play: Off
Shuffle play: Off
Clear My playlist
Prune servers
Music player
?DAD: Les:
?JENNY: Jenny’s music
HOME_PC: Mum’s music
Shared media
50
Prune servers
Your sound system stores details of UPnP servers that it has seen via its network
connection in its internal memory. If you use the sound system at different
locations you may
fi
nd that there are servers listed by the sound system that
you are no longer interested in. The prune servers functions allows the list
to be updated so that only active UPnP severs on the currently connected
network are shown when selecting 'Shared Media' from the Music Player menu.
1. Press the
Menu
button to enter the main Music Player menu.
2. Rotate
the
Tuning/Select
control until
'Prune servers'
is highlighted on
the display. Press the control.
3. To remove servers that are no longer required rotate the
Tuning/Select
control until
'YES'
is highlighted on the display. Press the control to cause
the servers to be removed.
4. If you do not wish to prune servers rotate the
Tuning/Select
control to
highlight
'NO'
and press the control to con
fi
rm.
Summary of Contents for Stream 93i
Page 102: ...99 Notes ...