22
Presetting stations
You may store your preferred DAB and FM radio stations to the preset station
memories (1 to 10). The procedure for setting presets and using them to
tune stations is the same for FM and DAB modes, and is described below.
Note that the radio stores FM and DAB presets separately and so there
are ten of each. Presets are preserved in the event of a power failure.
1. Press the
On / Standby button
to switch on your sound system.
2. Tune to the required station as previously described.
3. Press and hold down the required
Preset button
(1 to 10) until the
display shows for example "Preset 1 saved". The station will be
stored using the chosen preset number. Repeat this procedure for
the remaining presets as you wish.
4. Preset memories which have already been stored may be overwritten
by following the above procedure if required.
Recalling a preset station
1. Press the
On / Standby button
to switch on your sound system.
2. Select the required waveband by pressing the
Radio
button.
3. Momentarily press the required
Preset button
(1-10) to cause your
radio to tune to the station stored in preset memory.
Note: If you have not previously stored a preset station and the preset
button is pressed "Empty preset" will be displayed.
1
DAB
2
3
3
Summary of Contents for MP-SOUND 53
Page 58: ...Notes 56...
