Roberts Gorden CorayVac Classic SF Series, Operation & Service Manual

Page: 85 / 94

SECTION 24: CORAYVAC
®
CLASSIC SF S
TART
-U
P AND
I
NSTALLATION
R
EPORT
79 of 83
SECTION 24: CORAYVAC ® CLASSIC SF START-UP AND INSTALLATION REPORT
CORAYVAC ® Classic SF Start-Up and Installation Report
Form must be completed and returned within 24 hours of start-up or warranty is void.
Date of Installation: Model # Serial #
Installed at: Service Company:
Name: Name:
Address: Address:
Phone: Phone:
Fax: Fax:
E-mail: E-mail:
Cut/Pinch Hazard
Wear protective gear
during installation,
operation and service.
Edges are sharp.
WARNING
Failure to follow these instructions can result in death, electric shock, injury or property damage.
Burn Hazard
Allow heater to cool
before service.
Tubing may still be hot
after operation.
Explosion Hazard
DANGER
Electrical Shock Hazard
Disconnect electric
before service.
More than one
disconnect switch may
be required to
disconnect electric from
heater.
Heater must be
connected to a properly
grounded electrical
source.
Leak test all compo-
nents of equipment
gas piping before
operation.
Gas can leak if
piping is not
installed properly.
Do not high pressure
test gas piping with
equipment
connected.
WARNING
Fire Hazard
Keep all flammable objects, liquids and
vapors the minimum required clearances to
combustibles away from heater.
Some objects will catch fire or explode when
placed close to heater.
Failure to follow these instructions can result
in death, injury or property damage.
WARNING
Falling Hazard
Use proper safety equipment and practices
to avoid falling.
Do not use any part of equipment as support.
Failure to follow these instructions can result
in death, injury or property damage.