Section A - 7
1200W MSD COLD STRIKE FOLLOWSPOTS
1119 & 1119 C
1419 & 1419 C
Rob
er
t Juliat r
eser
ve the right t
o change or alt
er an
y of the it
ems detailed on this page
, t
o incr
ease or impr
ov
e man
uf
ac
turing t
echniques without prior notic
e.
TECHNICAL FILE
robert juliat
32, rue de Beaumont F 60530 Fresnoy-en-Thelle phone: +33 (0)3.44.26.51.89 - fax: +33 (0)3.44.26.90.79 - www.robertjuliat.com
ADMISSIBLE LAMP :-
PHILIPS: MSD 1200
Manufacturer's recommendations:
• Read attentively the manufacturer's instructions.
• Positioning of the lamp and connecting of the power supply require great care. To make sure there is a good
conduction of current, the mechanical support and the electrical connections must be free form dirt and corrosion.
The clamps and brackets must be checked whenever the lighting unit has been transported.
• The lamp emits ultraviolet radiation. Direct exposure can be harmful to your health.
• It is recommended to avoid air draughts, also avoid exposing the lighting unit to bad weather.
• Use only when bulb in place
Technical characteristics:
User's precautions:
• The lamplife, as given by the manufacturer, is an theoretic lamplife duration as "in laboratory conditions" a cycle
based on 3 hours on / 1 hour off, cycles more brief, reduce the duration of the lamplife.
• Premature wearing of lamp under performing conditions, is mainly due to frequent switching on. Better to leave
the lamp on, through the performance, rather than switching it on repeatedly. ( The lampelife is reduced about
1 hour, each time the lamp is lighten ).
• Use over 1500 hours of the lamp : change the lamp even if it still lights up.
New lamp:
• To achieve a good ionization of a new lamp, when using it for the first time, it is recommended to leave it on
for a few hours.
• Preserve carefully the guarantee slip of the lamp, as it may be asked for in the event of a dispute.
Thank you.
Follow spot description :
Standard range
“C” range
Voltage use :
(European Standard) 230/245 Volts. 50Hz.
Voltage use :
(North American standard) 208 Volts 60Hz.
110 Volts 60Hz.
Minimum voltage supply :
198 Volts
105 Volts
(Below this charge = possible ignition failure).
Lamp description :
MSD 1200
Nominal adsorbed wattage :
1200 Watts
Lamp voltage :
100 Volts
Lamp current :
13,8 Amps
Base :
G 22
Luminous flux :
92 000 Lumens
Colour temperature :
6000 Kelvin
Manufacturer's rated life :
2000 Hours
Summary of Contents for MANON 1419
Page 2: ...ii NOTES...
