- 13 -
5.1.5 PSU
LED
3 red LED are located on each electronic card (RJ NET control board and motor).
LED on indicates PSU is OK.
5.1.6 Light
sensor
Remove dust from the light sensor conduct.
5.1.7 Shutter
limit
stop
Remove dust from shutter limit stops.
5.2 Analyse
In there is still a problem after the
Troubleshooting
procedures (Cf. 6.), contact RJ distributor with the following
information:
•
Model and serial number of the followspot.
•
RJNET
version*.
•
Dimmer
version*.
•
Data given by the dimmer test*.
•
Description of the problem.
*Values available in the TEST/VERSION menu (Cf. 4.3.2)
